How to play

How to play Hive

2 players20 minAbstract

Hive is a two-player game with no board. Each player has 11 bug tiles, and you take turns placing a tile or moving one in play. You win by surrounding the other player's Queen Bee on all six sides, and you have to place your own Queen Bee by your fourth turn.

CABy Corin Ashdown · Updated · 8 min read

In one paragraph

Hive has no board: the tiles you play build the playing area. On your turn you place a new tile or move one already in play, and each bug moves in its own way. Keep every tile connected in one hive, get your Queen Bee down by turn four, and win by surrounding the opposing Queen Bee on all six sides.

The basics

Players2
Play timeAbout 20 min
Age9+
DesignerJohn Yianni
PublisherGen42 Games
First released2001
Tiles22 (11 per player)
BoardNone. The tiles in play form the surface.
Edition: this guide teaches the base game with the 22 tiles of the Gen42 box, following Gen42's published rules leaflet. The Ladybug, Mosquito and Pillbug are optional extra tiles and are only covered in a short note at the end.

How do you set up Hive?

  1. Pick a color. One player takes all 11 black tiles and the other takes all 11 white tiles.
  2. Lay your tiles out face up where you can both see them. Each player has 1 Queen Bee, 2 Beetles, 2 Spiders, 3 Grasshoppers and 3 Soldier Ants.
  3. Clear a flat space. There is no board. The first tile goes in the middle and the hive grows from there.
BugTiles per playerTiles in the box
Queen Bee12
Beetle24
Spider24
Grasshopper36
Soldier Ant36
Total1122

How does a turn work?

One player puts any tile in the middle of the table. The other player then places one of their own tiles touching it, edge to edge. After that you alternate, and on each turn you do one of two things:

  • Place a tile from your supply into the hive.
  • Move a tile you already have in play, using that bug's movement.

You can't move anything until your Queen Bee is in play, so your first turns are all placements. Once a tile is placed it can never be taken off the table, and you can win without placing every tile.

Opening timeline

Your turnWhat you can do
1Place any tile. The second player's tile has to touch the first one. The standard rules let you place the Queen Bee right away.
2Place a tile (you can't move yet unless the Queen Bee is already down).
3Place a tile, or move if your Queen Bee is in play.
4If your Queen Bee still isn't in play, you must place it now.
5 and laterPlace or move as you like, as long as the rules below allow it.

There is also an optional Tournament Opening Rule that forbids placing the Queen Bee on your first turn. Wikipedia dates it to 2009 and says it became official with Hive Ultimate in 2024, and Board Game Arena offers it as a setting. Gen42's base-game leaflet has no such restriction, so agree with your opponent before you start whether it applies.

Where can you place a tile?

  • The new tile must touch your own color and must not touch any opposing tile. Only each player's first tile is exempt from this, which is why the second tile of the game can touch the first.
  • Stacks take on the color of the top tile. A Beetle sitting on an enemy tile makes that stack count as your color for placement.
  • Surrounded spaces are fine. You can place a tile into a space that is boxed in, if it follows the color rule.
  • A Beetle can't be placed on top of the hive. It goes down like any other tile and climbs later.
  • You can move to a space that touches enemy tiles. The touching rule applies to placing only, not to moving.

How does each piece move?

Every move is a slide along the outside of the hive, apart from the Beetle's climb and the Grasshopper's jump.

BugTiles eachHow it movesWhat to know
Queen Bee1Slides 1 space.Only one step at a time, so moving her is a slow way to dodge trouble. It must be placed by your 4th turn.
Beetle2Moves 1 space, and can climb on top of the hive, move across the top, and drop into spaces other bugs can't reach.A tile under a Beetle can't move, and the stack counts as the Beetle's color. Only another Beetle can block a Beetle that is on top.
Grasshopper3Jumps in a straight line over one or more tiles to the first empty space beyond them.It can fill a gap that is surrounded, and it can't jump over an empty space.
Spider2Slides exactly 3 spaces around the hive, no more and no fewer.It can't go back on itself, and at every step it must stay in contact with the hive.
Soldier Ant3Slides any number of spaces around the outside of the hive.The most mobile bug, as long as it can physically slide out and into the space.

Each side has three Ants and three Grasshoppers for long-range movement, two Spiders for fixed three-step moves, and two Beetles. A Beetle climbing onto a tile freezes it for as long as it stays there, so it is the bug that can pin a piece, including a Queen Bee, in place.

Why can't I move this piece?

Two rules cause most illegal moves. Use this table as a checklist before you pick a tile up.

CheckThe ruleWhat it means in play
Queen in play?You can't move until your Queen Bee is placed.Your first turns are all placements.
One Hive ruleAll tiles in play must stay linked at all times.If a tile is the only link between two groups, it can't move. A move that re-links the hive at the end is still illegal if the hive is split while the tile is in transit.
Freedom to MoveBugs only slide, so a tile has to be able to physically slide out of its space and into the new one.A tile boxed in on its sides can't move. The exceptions are the Grasshopper, which jumps, and the Beetle, which climbs up or down.
Beetle on top?A tile with a Beetle on it can't move.Climbing onto a tile pins it until the Beetle leaves.
Right distance?Spider: exactly 3. Queen and Beetle: 1.A Spider that can only travel 2 spaces can't move at all.

The One Hive rule works as an attacking tool too. A tile that is the only link in a chain is pinned in place, so you can leave your opponent's key bugs unable to move simply by how you build.

How do you win, draw or pass?

  • Win: a Queen Bee is surrounded on all six sides by tiles of either color. The player whose Queen is surrounded loses. Your own tiles can help surround an enemy Queen, and the enemy's tiles can surround yours.
  • Draw by simultaneous surround: if the move that surrounds one Queen also completes the surround of the other, the game is a draw.
  • Draw by agreement: if both players are forced to shuffle the same two pieces back and forth with no way out, they may agree to a draw.
  • Pass: if you can neither place a tile nor move one, your turn passes to your opponent, who plays again. This continues until you can act or your Queen is surrounded.

Common mistakes

  • Placing next to an enemy tile. After each player's first tile, a new tile can't touch the other color.
  • Moving before the Queen is down. You can't until she's in play.
  • Forgetting the fourth-turn deadline. If your Queen Bee isn't in play, turn four has to be that placement.
  • Splitting the hive mid-move. The hive has to stay connected the whole way, not only when the move ends.
  • Moving a tile that's under a Beetle. Pinned tiles can't move.
  • Moving a Spider 1 or 2 spaces. It's exactly 3.
  • Forcing a tile through a gap it can't slide into. Gaps count unless the bug jumps or climbs.
  • Thinking only enemy tiles count. Any tiles surrounding a Queen count, including her own side's.

What about the expansion pieces?

Gen42 sells the Ladybug, Mosquito and Pillbug as extra tiles for the standard game. They add new bugs with their own movement rules, and they are not part of the 22-tile base game described here. Gen42 also lists Hive Pocket, Hive Pocket Ultimate and Hive Ultimate editions. Check which tiles are in your box before agreeing to play with any of them.

Questions

How many pieces does each player have in Hive?

Each player has 11 tiles in the base game: 1 Queen Bee, 2 Beetles, 2 Spiders, 3 Grasshoppers and 3 Soldier Ants.

Do you have to place all your pieces?

No. You can win without placing every tile, and you can keep tiles in your supply for the whole game. Once a tile is placed, it can't be taken back.

When do you have to place the Queen Bee?

By your fourth turn. If the Queen Bee isn't in play by then, your fourth turn must be placing it. You can also place it earlier, and you can't move any tile until she is down.

What is the One Hive rule?

All tiles in play must be linked at all times. You can't leave a tile stranded or split the hive into two groups, even briefly in the middle of a move.

What happens if you can't move or place a tile?

Your turn passes and your opponent plays again. If that's still true after their next turn, it passes again, until you can act or your Queen Bee is surrounded.

Can the game end in a draw?

Yes. It's a draw if the same move surrounds both Queen Bees, and the players can agree to a draw if neither can break a repeating stalemate.

Hive is #5 on our best 2-player board games for adults and a pick in our best strategy board games. For another quick two-player game, see how to play Jaipur or 7 Wonders Duel, or browse every how-to-play guide.

CA
Corin Ashdown · Editor

Corin Ashdown is the pen name of the editor who writes and checks every guide on Vorbelutrioperbir. How we write and check guides.